RCEXL DLE Mini Ignition Tachometer

SKU: BRC1278

Be the first to review this product

$14.95 (USD)

Qty:

+ -

Description

Rcexl Mini Ignition Tachometer

PIC16f628a microcontrollers
Does not require batteries, Powered from the ignition
Standard FUTABA plug(Black-Negative Red-Positive and White-Signal)
Using high-brightness LED digital display.
Input voltage range:3.5V-8.4V
Current consumption 25mA-60mA
Mini tachometer indicates up to 30,000 rpm
Actual RPM= Display Digital *10
Body Size: 41mm L x 17mm W x 12mm H
Display Size: 30mm L x 15mm H
Weight:8.5g (0.3OZ)

Works with all RCEXL ignitions, New saito RCEXl ignition and OS30GT ignition

Instructions:

1.Connect via Y lead (supplied) between the HALL sensor and the ignition.
2.Connect Tachometer plug into other end of Y lead (supplied)
3.Once ignition power is turned on, RPM will be displayed.

Note:
That connecting plugs should be secured with clips/heat shrink/tape to prevent them coming apart due to engine vibration

The hall sensor & tachometer wires need to be seperated from the Ignition high-voltage wire and receiver wires as much as practical

The tachometer is not recommended for use in flight, it is best to remove the Y wire to restore the original sensor connection before flying.

If your ignition has an additional tachometer output, you should connect to the dedicated tachometer signal wire.

Product tags

dlengines (349)
,
dl engines (349)